PARAEVOLUCE.COM

A helmet designed especially for power-paragliding. It is developed for the highest comfort and safety of the pilot. A helmet is without walkie-talkie, includes only headphones with possibility of adding a communication device (e.g. Interphone F4). The use of the best quality glass, aramid and carbon fibres is the basis for attaining the lowest weight and rigidity. The inner lining provides maximum comfort of the pilot´s head. The inner lining is both removable and washable. The headphones with gel ear seals for noise protection are adjustable. The helmet can be used for free paragliding after removing the headphones. Possible to add the carbon protective helmet visor.

Standard design: black-chrome, white-carbon, metallic gray-carbon, light metallic blue-carbon, dark metallic blue-carbon

Designs made to order: carbon-chrome

Size:
XS – for head circumference 53 – 55 cm

S - for head circumference 56 – 58 cm

M – for head circumference 57 – 59 cm

L - for head circumference 58 – 60 cm

XL – for head circumference 59 – 62 cm

XXL – for head circumference 61 – 64 cm

Weight 600 g ± 50 g according to variant and size

Interphone F4 is a multifunction intercom which provides:

- communication with another Interphone within a 500m radius

- communication with another PMR walkie-talkie using Tribe placed in your pocket.

- Interphone F4 and Tribe connection via Bluetooth.

- F4 offers a hands-free option of connection between mobile phones, alert by ringing for incoming phone call, voice dialling and    answering wireless hi-fi stereo connection via Bluetooth

- Full-duplex communication with DSP processor and wind-shield

Interphone F4 is interchangeable and it could be used to another helmet (motorbiker, ski helmet…) Interphone F4 resists water.

A basic helmet for power-paragliding with minimal weight and a high level of noise elimination. The use of the best quality glass, aramid and carbon fibres is the basis for attaining the lowest weight and regidity. The headphones with gel ear seals for noise protection are adjustable. The inner lining is both removable and washable.

Interphone F4 is a multifunction intercom which provides:

– communication with another Interphone within a 500m radius

- communication with another PMR walkie-talkie using Tribe placed in your pocket. Interphone F4 and Tribe connection via Bluetooth.

- F4 offers a hands-free option of connection between mobile phones, alert by ringing for incoming phone call, voice dialling and answering

- wireless hi-fi stereo connection via Bluetooth

- Full-duplex communication with DSP processor and wind-shield

Interphone F4 is interchangeable and it could be used to another helmet (motorbiker, ski helmet…) Interphone F4 resists water. A battery charger and protective cover are delivered with the helmet.

Interphone Tribe is voice -activated and hands-free walkie-talkie necessary for comunication with another PMR walkie-talkie.

- coverage up to 6 km

- 8 channels, operating frequency 446 Mhz

- VOX - 3 levels

Standard design: white, black, blue, metallic gray

Designs made to order: carbon

Size:
XS – for head circumference 53 – 55 cm

S – for head circumference 56 – 58 cm

M – for head circumference 57 – 59 cm

L – for head circumference 58 – 60 cm

XL – for head circumference 59 – 62 cm

XXL – for head circumference 61 – 64 cm

Weight 490 g ± 50 g according to variant and size

A helmet designed especially for power-paragliding. It is developed for the highest comfort and safety of the pilot and for communication during flight. The helmet provides contact between the pilot and another pilot, passenger or overland support. The use of the best quality glass, aramid and carbon fibres is the basis for attaining the lowest weight and rigidity. The inner lining provides maximum comfort of the pilot´s head. The inner lining is both removable and washable. The headphones with gel ear seals for noise protection are adjustable. The helmet can be used for free paragliding after removing the headphones.

Interphone F4 is a multifunction intercom which provides:

– communication with another Interphone within a 500m radius

- communication with another PMR walkie-talkie using Tribe placed in your pocket.

- Interphone F4 and Tribe connection via Bluetooth.

- F4 offers a hands-free option of connection between mobile phones, alert by ringing for incoming phone call, voice dialling and answering wireless hi-fi stereo connection via Bluetooth

- Full-duplex communication with DSP processor and wind-shield

Interphone F4 is interchangeable and it could be used to another helmet (motorbiker, ski helmet…) Interphone F4 resists water. A battery charger and protective cover are delivered with the helmet.

Interphone Tribe is voice-activated and hands-free walkie-talkie necessary for comunication with another PMR walkie-talkie.

- coverage up to 6 km

- 8 channels, operating frequency 446 Mhz

- VOX - 3 levels

Standard design: black-chrome, white-carbon, metallic gray-carbon, light metallic blue-carbon, dark metallic blue-carbon

Designs made to order: carbon-chrome

Size:

XS – for head circumference 53 – 55 cm

S   – for head circumference 56 – 58 cm

M – for head circumference 57 – 59 cm

L   – for head circumference 58 – 60 cm

XL – for head circumference 59 – 62 cm

XXL – for head circumference 61 – 64 cm

Weight with Interphone F4 700 g ± 50 g according to variant and size

The base of the helmet is composed of a composite shell, on which the resistance and durability of the helmet are dependant.

Three types of material can be used for the production of helmets – glass fibres, carbon fibres and aramid fibres.

Glass fibres is the basic material of all layered laminates.

Carbon fibres gives a very high bend resistance and solidity. Carbon is three times stronger in compression and three and half times stronger in traction than glass-fibre. Thanks to this excellent attribute it doesn’t require the use of as many layers as the products made using only glass fabric. This makes the product lighter. For this reason, you will find these materials used in sport at the highest levels (Formula-1; Kayaks, Skiing; Racquet sports; Fishing; Cycling and even Motor manufacture …) or in health care (prosthesis).

Aramid fibres make the product tough, crash and abrasion resistant. This attribute is the reason the material is used for the manufacture of ballistic vests.

A combination of these materials balances the toughness of aramid and the resistance of carbon. It makes the helmets sufficiently firm that the helmet is more cash resistant, to withstand larger impacts to the helmet, and resistance which is necessary for the protection of the head against laminates slivers which result from breaking the helmet.

You can identify the materials which were used by looking inside the shell. Carbon fibre is black and aramid fibre is yellow. Inside the shell of most of the helmets found on the market isn’t painted, because there is no reason to hide the quality, and besides that, another layer of colour would make the product heavier. This makes it easy to examine the quality of the helmet. If you find the helmet is manufactured using only glass fibres without carbon-aramid support, then it is obvious that priority has been given to producing a helmet with the lowest production cost. This can prejudice the strength and weight of the helmet.

Secure double-coloured buckles are used on the helmets.

The inner lining is made of high quality materials. The liner is removable, making maintenance easier. The lining is designed to offer pilots the highest comfort. The sizes of the liner are carefully chosen to fit securely, not to be loose and not to pinch.

For development power-paragliding helmets is used a very small and light Albrecht Tectalk FM+ walkie-talkie. The development is placed in the helmet´s visor so there are no dangerous protrusions inside the helmet and the electronics of the walkie-talkie are not in affected by sweat from the pilot.

The headphones with gel ear seals for noise protection are adjustable.

HELMETS Basic, Aero, Open Face, Suchanek, Maxim, Full Face

HELMETS Race and Integra

HELMET Power

HELMET Engine

A helmet designed especially for power-paragliding. It is developed for the highest comfort and safety of the pilot and for communication during flight. The helmet provides contact between the pilot and another pilot, passenger or overland support. The use of the best quality glass, aramid and carbon fibres is the basis for attaining the lowest weight and rigidity. The inner lining provides maximum comfort of the pilot´s head. The inner lining is both removable and washable. The headphones with gel ear seals for noise protection are adjustable. The helmet can be used for free paragliding after removing the headphones.

This uses a very small and light Albrecht Tectalk FM+ walkie-talkie. The development is placed in the helmet´s visor so there are no dangerous protrusions inside the helmet and the electronics of the walkie-talkie are not in affected by sweat from the pilot. This walkie-talkie has 5kms radius, 8 channels, 38 sub-channels, 3 VOX sensitivity levels, FM radio 88 – 108 MHz and works on frequency PMR 446 MHz, which is free in most European countries . The Li-on battery is recharged via a connector on the helmet’s visor. A remote PTT, battery charger and protective cover for the helmet are included. If you would like to use the helmet for free paragliding, it can also be delivered with independent headphones.

Standard design: black-chrome, white-carbon, metallic gray-carbon, light metallic blue-carbon, dark metallic blue-carbon

Designs made to order: carbon-chrome

Size:
XS – for head circumference 53 – 55 cm

S - for head circumference 56 – 58 cm

M – for head circumference 57 – 59 cm

L - for head circumference 58 – 60 cm

XL – for head circumference 59 – 62 cm

XXL – for head circumference 61 – 64 cm

Weight with PMR 850 g ± 50 g according to variant and size

It is posible to add Interphone F4 (more about it in Power F4)

Weight with PMR and Interphone F4 toghether 900 g ± 50 g according to variant and size

A basic helmet for power-paragliding with minimal weight and a high level of noise elimination. The helmet doesn’t include a walkie-talkie. It has the facility for connection to a radio. It is possible to add some kind of walkie-talkie (e.g. Interphone F4). The use of the best quality glass, aramid and carbon fibres is the basis for attaining the lowest weight and regidity. The headphones with gel ear seals for noise protection are adjustable. The inner lining is both removable and washable. The helmet is delivered with a protective cover.

Standard design: white, black, blue, metallic gray

Designs made to order: carbon

Size:

XS – for head circumference 53 – 55 cm

S – for head circumference 56 – 58 cm

M – for head circumference 57 – 59 cm

L – for head circumference 58 – 60 cm

XL – for head circumference 59 – 62 cm

XXL – for head circumference 61 – 64 cm

Weight 420 g ± 50 g according to variant and size

Interphone F4 is a multifunction intercom which provides:

- communication with another Interphone within a 500m radius

- communication with another PMR walkie-talkie using Tribe placed in your pocket. Interphone F4 and Tribe connection via Bluetooth.

- F4 offers a hands-free option of connection between mobile phones, alert by ringing for incoming phone call, voice dialling and answering

- wireless hi-fi stereo connection via Bluetooth

- Full-duplex communication with DSP processor and wind-shield

Interphone F4 is interchangeable and it could be used to another helmet (motorbiker, ski helmet…) Interphone F4 resists water.

A luxury integral helmet with an aerodynamic shape. The main focus is on maximum head protection for the pilot. Unrivalled as being the lightest helmet in this category. The well-designed inner construction of the helmet and use of the best quality glass, aramid and carbon fibres is the basis for attaining the lowest weight and rigidity. The lining has two inner shock-absorbing and protection layers. The inner lining provides maximum comfort for the pilot and the outer protection layer made of special foam gives the most effective protection and impact absorption. A double colour design is used, similar to the Race helmet. It is also possible to supply it in the carbon-chrome design. There is provision within the helmet to attach a radio head-set. The inner lining is both removable and washable. The helmet is delivered with a protective cover.

Standard design: black-chrome, white-carbon, metallic gray-carbon, light metallic blue-carbon, dark metallic blue-carbon

Designs made to order: carbon-chrome

Size:
XS – for head circumference 53 – 55  cm

S – for head circumference 56 – 58  cm

M – for head circumference 57 – 59  cm

L – for head circumference 58 – 60  cm

XL – for head circumference 59 – 62  cm

XXL – for head circumference 61 – 64  cm

Weight 570 g ± 30 g according to variant and size

A luxury integral helmet. The main focus is on maximum head protection for the pilot. Unrivalled as being the lightest helmet in this category. The well-designed inner construction of the helmet and use of the best quality glass, aramid and carbon fibres is the basis for attaining the lowest weight and rigidity. The lining has two inner shock-absorbing and protective layers. The inner lining provides maximum comfort for the pilot and the outer protection layer made of special foam gives the most effective protection and impact absorption. A double colour design is used, similar to the Integra helmet. It is also possible to supply it with the carbon-chrome design. There is provision within the helmet to attach a radio head-set. The inner lining is both removable and washable. The helmet is delivered with a protective cover.

Standard design: black-chrome; white-carbon, metallic gray-carbon, light metallic blue-carbon, dark metallic blue-carbon

Design made to order: carbon-chrome

Size:
XS – for head circumference 53 – 55  cm

S – for head circumference 56 – 58  cm

M – for head circumference 57 – 59 cm

L – for head circumference 58 – 60 cm

XL – for head circumference 59 – 62 cm

XXL – for head circumference 61 – 64 cm

Weight 570 g ± 30 g according to variant and size

The lightest integral helmet especially suitable for free flying. The integral shape of the helmet protects the jawbone; the front is distinctively strengthened with carbon rows. The use of the best quality glass, aramid and carbon fibres is the basis for attaining the lowest weight and rigidity. A two colour design is used on the helmet, similar to the Maxim helmet. The inner lining is both removable and washable.

Standard design: black-chrome, blue-carbon, metallic gray-carbon

Size:

XS – for head circumference 53 – 55 cm
S – for head circumference 56 – 58 cm
M – for head circumference 57 – 59 cm
L – for head circumference 58 – 60 cm
XL – for head circumference 59 – 62 cm

Weight 470 g ± 30 g according to variant and size